Nederland
België
Deutschland
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
- Delivery in 4-5 working days
- Free tracked shipping over 99,00€
- Trustpilot rating 4.6/5
Ask a question about this product
Pros & Cons
Pros & Cons
- This modern bottle cage weighs in at only 32 grams!
- The clever design will keep your bottle in place even on rough terrain.
- Suited for installing on all sorts of bikes, like road bikes, mountain bikes, touring bikes and gravel bikes!
- Installation materials included.
- This bottle cage does not allow you to insert a bottle from the side.
Specifications
Specifications
| Brand | Mantel | |
| Bottle Cage Type | Lightweight / Modern | |
| Material | Plastic | |
| Weight | 32 grams |
Lightweight plastic design
Weighing in at only 32 grams, this bottle cage is perfect for rides where every gram counts. In addition, the Mantel Bottle Cage clamps tightly onto your bottle, firmly keeping it in place with the cage's ergonomic design. Even during the most intense bike rides on rough terrain, this bottle cage prevents shaking and rattling, so you can effortlessly rehydrate while focusing on the road!
Versatile
This stylish bottle cage with maximum functionality is suitable for all standard bottles and can be installed on road bikes, mountain bikes, gravel bikes and other sportsbikes! The cage always comes with installation materials, so you can easily and quickly mount it on your bike and go on an adventure.
Reviews
Reviews
Photos from customers
Most recent reviews
1 / 5
Not recommended.
There’s nothing good to say about it. After an hour’s ride on my road bike, one of the bottle cages snapped off on a gentle cobbled section. Don’t buy it, folks!
Pros & Cons
1 / 5
Poor quality
The bottle cage is poor quality. It snapped in half after 14 months. It also scratches expensive metal water bottles because it clamps too tightly around them. I’ve now replaced it with the bottle cage from my old Gazelle bikes. That one is over 12 years old but is of much better quality.
Pros & Cons
1 / 5
Poor quality
I have two on my bike, both broke within 2 months of purchase.
Pros & Cons
4 / 5
Not expensive and nice and strong enough for cycling!
Very elegant bottle cage. Strong enough for a road bike. Bottle sits firmly but you can grab the bottle smoothly. It is a nice shiny one that matches the more shiny bike frames.
Pros & Cons
1 / 5
Breaks down too quickly and therefore dangerous
On the face, fine bottle cages. However, not compatible with rougher terrain. I had put them on my new mtb, but after 3 rides the first one broke and on the 4th ride the second holder broke during a descent. Fortunately, I was aware that it could go wrong and was not shocked when the bottle shot loose from the holder. It seems a particularly brittle material was chosen that is not tough/flexible enough for use on a mtb: A quick drink between segments. Then you're just a bit rougher/quicker with grabbing and putting back, putting forces on the holder that it apparently can't handle. So back to a KingCage.
Pros & Cons
1
Poor quality
The bottle cage is poor quality. It snapped in half after 14 months. It also scratches expensive metal water bottles because it clamps too tightly around them. I’ve now replaced it with the bottle cage from my old Gazelle bikes. That one is over 12 years old but is of much better quality.
-
Damages the water bottle
-
Poor quality
4
Not expensive and nice and strong enough for cycling!
Very elegant bottle cage. Strong enough for a road bike. Bottle sits firmly but you can grab the bottle smoothly. It is a nice shiny one that matches the more shiny bike frames.
-
Beautiful appearance
-
Lightweight
-
Mounting bolts included
-
Not compatible with mtb
1
Breaks down too quickly and therefore dangerous
On the face, fine bottle cages. However, not compatible with rougher terrain. I had put them on my new mtb, but after 3 rides the first one broke and on the 4th ride the second holder broke during a descent. Fortunately, I was aware that it could go wrong and was not shocked when the bottle shot loose from the holder. It seems a particularly brittle material was chosen that is not tough/flexible enough for use on a mtb: A quick drink between segments. Then you're just a bit rougher/quicker with grabbing and putting back, putting forces on the holder that it apparently can't handle. So back to a KingCage.
-
Design
-
Broken too quickly
-
Crumbly material
Frequently bought together
Frequently bought together
Recommended by the product specialist
Recommended by the product specialist
Related products
Related products
|
|
|
|
|
| Mantel Bottle Cage | Cube HPP | Elite Custom Race | Trek Elite Recycled Bottle Cage | |
| 19 reviews | 29 reviews | 347 reviews | 4 reviews | |
| Quantity | 1 piece / 2 pieces | 1 piece / 2 pieces | 1 piece / 2 pieces | 1 piece / 2 pieces |
| Bottle Cage Type | Lightweight / Modern | Lightweight / Modern | Lightweight / Modern | Lightweight / Modern |
| Material | Plastic | Plastic | Plastic | Plastic |
| Weight | 32 grams | 36 grams | 40 grams | 38 grams |
| Colour | Black / Matte Black / Matte Red / Matte White | Zwart / Grijs / Zwart / wit | Black / Grey / White / Blue / Red / Orange / Yellow / Brown | Black / Grey / White / Blue / Red / Silver |
| From 9,91 | From 17,23 | From 14,18 | From 13,21 | |
| This product | View product | View product | View product |